Problems with Baxi Boiler and interrupted Gas supply or flame fault? - boiler problems
Hello everyone,
I had the boiler for about 20 months, and during the last two or three weeks, I had an error code E133, which means the distribution of gas or failure of the flame. I wonder what his problem or what could be the cost potental?
Tuesday, January 12, 2010
Boiler Problems Problems With Baxi Boiler And Interrupted Gas Supply Or Flame Fault?
2 comments:
She did not say which model of the boiler that they have as models for different operating systems have been used, slightly different, but they say 20 months old were treated at this stage as if he would support the idea that an electrode contaminated or possibly a dirty burner and the electrode is not in the flame does not even know that your oven is on, what happens with the strike, E133.
I have not seen your stove before, but generally all work on similar principles. first go in, switch on when the boiler on and off again if the light from the burner, and when they returned after a few seconds, chances are you have a dirty flame sensor, a bar of metal, the flame should be so drawn to it and the cleaning of metal surfaces with a dollar bill, non-abrasive something now, if your boiler is not lit, you might have a bad fuse, usually when was your observation and you hear a click and the gas comes out and does not appeal, there the scenario, and proabably could get a place to receive or from your local contractor. Please contact me if I can help more, hope this helps
Post a Comment